How to Properly Build a Secure Dog Box For a Truck

By | September 10, 2018

For most individuals, their pet dog is a valuable part of their lives and when they travel for vacation, the pet comes with them. But most vehicles have limited space and trying to focus your attention on the driving wheel can be pretty challenging when your pet is causing disturbance.

One of the ways that you can solve this problem is constructing a dog box for your truck that can house any type of dog. Pet boxes are very simple to construct and is similar to a typical dog house. While materials for this project can be a little expensive, building the whole set-up is very easy.

Before beginning the construction of your project, think about how you want to use it. Most pet boxes can be compared to boxes that contain tools that are placed on the bed of a vehicle or truck.

The dog box for your truck should be very sturdy, resistant to different kinds of weather and should possess a feature that will allow you to strap it to the base of the vehicle. The set-up must be dog-friendly, well-ventilated but insulated against changing temperatures. It should also be easy to handle and maintain.

Video Link :https://wp.me/p99cXh-1Wc

It is a good idea to research box plans if you do not have any idea what you want. Some drafts are even specially made for certain truck model.

MATERIALS NEEDED IN CONSTRUCTING A DOG BOX FOR A TRUCK

Pick the materials that you want to use for your project. There are different choices like metal, aluminum (which is a good material since it can be easily manipulated), wood (choose a type of wood that is pretreated) and plastics that have polyurethane.

STEPS IN CREATING A DOG BOX FOR A TRUCK

Get the necessary measurements for the set-up. The two considerations that you need to remember before building your project is the truck size and the size of your pet. But your main consideration should be how big your pet dog is. After you have decided the space for the box, you can now begin dividing your project materials.

You need to create a base, the four walls of the box and the roof. Place a door on one portion of the box so that your pet can easily go in and out of the structure. Usually, a box should have a total width of twenty-four inches, a total height of twenty-two inches and a total length of thirty-nine inches. Once you have created your pieces for the set-up, create pockets to ensure proper ventilation on the sides of your box. Do not place holes above or below of the pet box to avoid H20 from coming inside the box if the bed of the vehicle gets wet.

Article Source: http://EzineArticles.com/4128086